Our building and land use pre-application requires basic preliminary information from you. This article details what you need to include in your application before you begin. This helps make the process easier.
If you start the process and get stuck, you can save your application by clicking Save and Resume Later at the bottom of each page.
If you don’t have the answer to a question, and it isn’t required, leave it blank. If the question is required click the Save and Resume Later button, locate the required information, return to the Seattle Services Portal, and search by record number to continue.
What You Need
You will need the following information to complete the application:
- the address of your project
- contact information for the applicant, owner, and contractor
- the project value (labor and materials, including any donated labor and materials)
- the ground disturbance cut and fill depth, if any
- the building code used for your project
- a site plan to upload with your application
You will also need to know whether your project needs:
- a pre-submittal conference (see Tip 318, Construction Pre-Submittal Conference)
- a master use permit (MUP) (see Tip 201, Master Use Permit (MUP) Overview, and our Land Use / Master Use Permit webpage)
- a subject-to-field-inspection permit (see Tip 316, Subject-to-Field-Inspection Permits, and our Construction permit – Subject-to-Field-Inspection webpage)
- a variance from the zoning code if required (see our Land Use / Master Use – Variance webpage)
- a shoreline exemption for removing hazardous trees (see Tip 331B, Hazard Trees)
- an approved standard plan set (see Tip 310, Standard Plans)
- a change to the building use or occupancy (see our Construction Permit – Establishing Use webpage)